Media Library / Images

ZVA HV for AdBlue®, SSB 16 SS, SL 16 for AdBlue®, Elafix 40

Urea solution (DEF, ARLA 32) for trucks: nozzle, Safety Break, hose assembly and adapter for the vehicle AdBlue^® filler inlet to avoid misfuellings.

ELAFLEX Hamburg

Main building / entrance

LNG Refuelling

N-LNG Nozzle, pull back handles to uncouple

CNG Safety Break with Extention 'EL' (Extended Length) SB-CNG FLVL-EL-J

 SB-CNG FLVL-EL-J

Oasis BV708, 1" ball valves, isolation valves, CNG trailer loading

ZVA Slimline 2, filler inlet, Diesel refuelling

Fluorflex FXD 50

PTFE / EPDM Universal helical hose - high performance chemical hose to DIN 26054, combining the universal chemical resistance of PTFE with exceptional flexibility and tight bending radius.

TSVC 100 hose connectors

Fittings to conect two hose assemblies - available in many sizes, with Spannloc or Spannfix clamps

DAC-V 65, DAC-M 65

Aircraft refueller , Dry Aircraft Coupling to ISO 45 for bottom loading - with and without sight glass

ZVA 25 for AVGAS

red scuffguard, AVGAS sticker; Slimline hose assembly

LBS 50 hose assembly for foodstuffs, FDA conform

with RMC 50 SS/SS (DIN 11851 foodstuff threaded coupling and Spannloc clamps of stainless steel)

Cargo loading of a tanker with petroleum based products; FHD hose assembly with new longitudinal stripe to avoid torsion

Picture courtesy of Macoil International, Gibraltar

Elaflex Pacific (Australia)

Functioning test GasGuard nozzle

ERV-G Yellow Band rubber expansion joint, installation underneath a road tanker

ELAFLEX Hamburg

MK-A 80 SS, TW female coupler with Active Safeguard Lever

connected: hose assembly with VKX 75.80 SS

ZVA Slimline 2

Automatic nozzle DN 19, for flowrate max. 80 l / min. Product Sleeve EK 043 blue, Slimline dispensing hose assembly

Elaflon PTFE 50 with FFX 50 SSE/SS; PCS 25 with AMKC 25 SSE/SS

Universal hoses with PFA coated fixed flange and Camlock fittings. Spannfix / Spannloc stainless steel clamps.

RS 1 x 11/4 SS

Reducer Female/Male

Composite hose assemblies with 'COPSAFE' , suitable for COP systems (cross-over prevention)

electrical conductivity

Yellow band aircraft refuelling hose, hose coupling with male thread, Spannloc aus Aluminium

HD 50 C, VC 50 SS, SC 50 Al

Oasis BV708, 1" ball valves, isolation valves, CNG spheres (tanks)

Hose assembly with STKC 75

Storz coupling with Spannloc clamps

ZVA 25 for aircraft refuelling

red plastic cover (scuffguard), decal (sticker) AVGAS, dust cap and ground cable assembly

Yellow Band hoses from Elaflex

Setting the standard for refuelling hoses

HD 100 C NEON, HD 10 C sensing hose

Type HD-C, aviation hose

Graphic Drip Stop spout for ZVA Slimline 2 nozzles

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

ERV VSD:

ERV with vacuum support spiral. Spiral of AISI 316 Ti, used when the vacuum resistance of the chosen ERV is not sufficient.

ERV-G Yellow Band rubber expansion joints, pumping system for oil emulsion