Media Library / Images

Road tanker reel with HD 50 hose assembly, ZV 500 nozzle

ROTEX 200.10 SS TAS

Rubber Expansion Joint with PTFE lining and PTFE vakuum support ring

DCC Dry Cryogenic Coupling for LNG

Coupling process

Adapters / couplers for vehicles fighting dangerous goods incidents:

"TW" Plugs and Caps MB 50 SS/Vi, VB 50 SS, VB 100 SS, BK 2" SS/Vi, BK 3" SS/Vi

ERV-G Yellow Band rubber expansion joints, manhole of a petrol station

ZVA Slimline 2 GR, black, guard 3 - bottom view

Fluorflex FXD universal hose assemblies with anti kinking spiral KSS

extremely flexible PTFE hose with maximum bending radius and safety against kinking

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

Guards for ZVA nozzles

suitable for all dispensers, world wide

ELAFLEX refuelling equipment:

Quality is in the detail.

BK 3 Ms

Cap with 3" female BSP thread, brass

MannTek DDC-V & DDC-M Dry Disconnect Couplings

Connection road tanker to trailer: TW hose assembly, DDC Dry Disconnect Coupling

IBC connection with reducer RS S100x3" SS

MannTek DDC-V 80, DDC-M 80, FWS 75 PP

ERV-G 50x160

Fuel mixer / blender

Stainless steel couplings with PFA coating, type "...SSE"

Surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Ship bunkering with LNG

Coupling of DCC male and female part DN 50; left hand side CBC 50 Cryogenic Breakaway Coupling

Offshore FSRU (Floating Regasification Unit), Unloading Gasoil Sludge

TW hose assemblies, reels

ELAPHARM Type EPH

electrically isolating 'I', with blue cover, to EN 16820, Type A. FDA conform, homogeneous elastomer hose construction with smooth, white PTFE liner. Clamp fittings, lining flared (free of dead spaces).

ELAFLEX Hamburg

Hose assemblies pressure testing (hydrostatic test)

Oasis FV103 180° Fill Valve for CNG

Slimline 21 blue

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

ELAFLEX Hamburg

ERV, assembling vacuum support spiral VSD

SBS 250 - marine cargo hoses with built-in nipples

heavy standard bunkering hose to EN 1765, category S 15

Slimline quality dispensing hose for the forecourt

ZVA Slimline 2 / ZVA Slimline 2 GR

Petrol station nozzles with (top) and without vapour recovery (below)

ContiTech Production hose

braid

MannTek DDC-V 150 F Al, DDC-M 150-6"

Production MannTek, Sweden

Transporter and school bus refuelling with LPG (L.P. Gas, Autogas, Propane)

GasGuard ACME nozzle