Media Library / Images

Slimline quality dispensing hose for the forecourt

ELAPHARM Type EPH

ELAFLEX Hamburg

Stock special flanges, pick by voice, scanning

L.P. Gas road tanker: long hose reel, LPG 32 and LPG 25 hose assemblies

Vehicle refuelling Korea with LPG (L.P. Gas, Autogas, Propane)

ZVG 2 K nozzle, LPG 16 hose assembly

DDC-M 80-3" SS

MannTek Dry Disconnect Coupling, DN 80, stainless steel

Oasis FV103 45° Fill Valve with NC 104 Nozzle, for CNG

Oil supply system

ZV 25 manual nozzles, hose assemblies

MB 50 SS

Dust cap for VK 50, stainless steel

HD-C LT, Low Temperature

LT (Low Temperature) types of our aircraft refuelling hoses are suitable for use in especially cold regions - high flexibility.

ZVA Slimline 2, black - top view

LTW 75 hose assembly

with MKX 75.80 Ms

ZVA Slimline 2 TMV nozzle for Diesel with DRIP STOP spout

Road tanker reel with HD 50 hose assembly, ZV 500 nozzle

Universal hoses UTL with DDC Dry Disconnect Couplings

Composite hose assemblies with 'COPSAFE' , suitable for COP systems (cross-over prevention)

electrical conductivity

VC 65-21/2" SS / SS

Spannloc threaded hose coupling with BSP male thread / Spannloc of stainless steel

MX 80-3" SS

Female coupling for hoses, stainless steel, with Spannfix clamp

H2 Cover Hose 'CH-H2 38'

Nozzle Thread

ERV-G Yellow Band rubber expansion joints, manhole of a petrol station

GasGuard GG11R

The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.

ELAPAC FD flat sealing material

2 or 3 mm thickness, available as coil, standard size seal or in custom shape. An elastic flange seal for tank truck and tank plant construction etc., where rough sealing surfaces require a high adaptability, where flange seals should still have good flexibility to avoid pipe fractures or simple sealing materials because little or no force can be used to tighten the joint.

EA 866 scuffguard: fuel grade identification 'LPG' to standard

The scuffguard for LPG / Autogas nozzles shows the LPG fuel grade marking required by standard, and offers a large advertising space

Elaflon Plus PTFE 38

Filling of small containers for chemicals

Group picture

TW 100, DDC-M100 4", Hose Reel VR Spring Rewind System, ZVA Slimline 2 GR, ERV-G 1000, ERV-BR 300

ZVA Slimline 2 GR, hand

scuffguard and product sleeve green, Slimline hose assembly with Colour Sleeve green

ERV-G AF

Suitable for piping systems of aviation refuelling or dispensing vehicles in accordance to EN ISO 1825/EI 1529. Suitable for all aviation fuels.

ELAFLEX Hamburg

Hose assemblies, pressure test (hydrostatic test)

MB 80 SSE

TW dust cap of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

Quick Tester GR 92

for the simple Yes / No functioning test of vapour recovery