Media Library / Images

M 21-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 21 hose, black.

LPG Autogas Adapter (filler inlet) BAYO

Bayonet connection

Oasis TM106 Trailer Unloading Manifold, for CNG

Flame resistance test hose

ERV-G, DN 250 and DN 300

Yellow Band

Unloading: MK couplers with DDC-V 80 adapter

Oasis FV103 Fill Valve, CNG dispenser

ZVA Slimline 2 GR nozzle

with Coax hose assembly (one side open end, inner vapour hose visible)

Rubber Expansion Joint ROTEX 80.16

ROTEX expansion joints suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative.

Urea solution filling, truck: ZVA AdBlue HV nozzle

ContiTech Production ERV

manufacturing the blank

Oasis BV706 ball valves with Code 62 flange and SAE connection, for CNG

Cabinet of road tanker:

MK 80 with VB 80 ADR SS (plug with pressure relief)

Nozzle boot NB-ZVF 50

for ZVF 50 Oberflügel-Zapfventile

Rail tanker unloading of petroleum based products

LTW hose assemblies; Poland

SVC 50-2"

Male hose coupling of steel with Spannloc clamps

Road tanker connection - MK 50 Ms, VB 50 Ms, Chain

Anti theft protection with padlock

VB 100 SSE

TW dust plug of stainless steel, surface in contact with the medium additionally coated with Teflon® PFA. This type is used if stainless steel does not have a sufficient chemical resistance (i.e. for hydrochloric acid and iron-III-chloride) and polypropylene is not possible because of insufficient stability. Available in all standard sizes.

ContiTech Production hose

Intermediate layer

SSB 16 LV

Safety Swivel Break, for ZVA AdBlue LV. Calibration switch 10 l/min - 5 l/min

ZVF 25 with EKG and GKG

Manual nozzle DN 25 for aircraft overwing refuelling, with ground cable assembly, dust cap assembly and AVGAS sticker (decal)

NR ferrule hose fittings, non reattacheable

ELAFLEX Hamburg, narrow aisle stock for small parts

ELAFLEX Hamburg

Incoming goods / flanges

H2 Hydrogen

ERV-H2+ PN 25, DN 80 und DN 100

ZVA Slimline 2 without scuffguard: body markings

Bonding Reel grey, high visibility bonding cable

IBC unloading

Coupling of chemical hose assembly with AMKC 50 SS (Camlock female with Spannloc attachment) to AMKI male coupling. Use of IBC-reducer RS 60 x 2 SS, directly attached to IBC.

Hose assemblies for LPG

with flange connection, ACME connection, NPT thread

ELAFLEX Hamburg, large new narrow aisle stock 2018 for hoses