Media Library / Images
In order to send you the picture material you need, please click some examples – after receipt of your E-Mail we will personally contact you to hear your exact requirements.
Category
- All
- Products
- Applications
- Company
Applications
- All
- Petrol Station Equipment
- AdBlue® Refilling
- Tank Truck Equipment
- Alternative Fuels
- Chemicals
- LPG / DME
- Pharmaceuticals
- CNG / NGV
- Aircraft Refuelling Equipment
- LNG
- Rail Tankers
- H2 Hydrogen
- Ships & Marina
- LH2 Hydrogen
- Rubber Expansion Joints
- Hose Reels
Sales Division
- All
- SAT(Hoses and Fittings)
- EHT(Petrol Pump Nozzles and Accessories / Hoses)
- ERV(Rubber Expansion Joints)
Sorting
- Newest on top
- Alphabetical
Filter by keyword
Oasis BV 708 1" Ball Valve for CNG
GasGuard GG11R
The GasGuard GG11 Back-Check Valve (GG11R: with additional release screw) should be standard equipment for any LPGas road tanker operator. It is used in conjunction with LPGas bulk refueling nozzles to contain leaks at storage tank fill points. If the fill point proves to be leaking when removing the nozzle it can be left on the tank until corrective action is taken. The driver can move to the next fill point without delay.
ZVA HV for AdBlue®, SL 16 for AdBlue®, Elafix 40 / Elafix 40 Anti-Siphon
Urea solution (DEF, ARLA 32) for trucks: nozzle, hose assembly and adapter (with/without anti-theft protection) for the vehicle AdBlue® filler inlet to avoid misfuellings.
MK 50 SSE
TW female coupler stainless steel, with PFA coating (red)
ERV-R 100.16
RED BAND Rubber Expansion Joint for water, drinking water (DVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature range - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.
Oasis SV 108 Sandwich Valves 1" on CNG trailer
DDC-M 100, TW hose assembly
Rail tanker bottom loading with Dry Disconnect Coupling
ContiTech Production ERV
In production testing, rubberized fabric
ELAFLEX Hamburg
Stock special flanges
HD 100 C NEON, HD 10 C sensing hose
Type HD-C, aviation hose
RN 2 x 3 SS
Reducing nipple
ElaSil® Silicone hose
Upstream Oil Industry, TW hose assemblies
Kuwait
Slimline 16 green
Quality dispensing hose for the forecourt
Hose Reel with hydraulic rewind system orange, LPG 32, DGC-M 50
MannTek Dry Disconnect Couplings:
DDC-M 80-3" SS with PolypalClean hose assembly, DDC-V 80-3" SS with pipe end
ERV-G 100 TW
Aircraft refueller
Oasis BV708, 1" ball valves, isolation valves, CNG spheres (tanks)
GasGuard LPG nozzle GG20DN
With long connector nut to access 'hard to reach' fill points. "DN": suited for use by the general public and untrained personell (self service). Patented dual nose piece for added safety. Low lever actuation force. Gas release volume on valve closure : 1,7 cm³.
Safety Swivel Break SSB 16 SS of stainless steel f. ZVA HV for AdBlue®
old design
LTW 100 hose assembly
with MC 100-51/2" Al
ERV SR:
ERV with inner protection sleeve of stainless steel AISI 316 Ti to prevent abrasion of the rubber liner, i. e. for media containing abrasive components or to avoid cavitation. Please note : The nominal bore is reduced.
Stainless steel Hose Reel spring rewind black, FEP 38, DDC-M 50 SS
Dispenser at the airport
ZVA 25 Avgas for overwing refuelling
Compact Line HD 50, Hose Reel Spring Rewind
FEP 5O, MannTek DDC-M 5O SS
ELAFLEX Hamburg
ZVA Slimline 2 GR
Camlock hose couplings: system comparison
Easyloc from Elaflex with automatically secured levers.
ContiTech Production hose
Tank hose after vulcanisation
ContiTech Production hose
Intermediate layer
ZVA Slimline 2, dispenser
Estonia