Media Library / Images

M 21-1" NR cr

Female ferrule hose coupling EN 14424, factory assembled, non-reattacheable. Slimline 21 hose, blue.

Slimline 21 black

Quality petrol pump hose for gasoline and diesel fuels. Also suitable for fuels with ethanol content up to E 85 and Biodiesel up to B 30 (BIO Type up to B 100). Meets weights and measures regulations, see overleaf. Cold flexible down to - 30° C / - 22° F (LT-type down to - 40° C / - 40° F). Corresponds to EN 1360 and EN 13483.

DDC-K 3" Al ADR with pressure relief

Cap for DDC-V 80
• Meets the ADR requirements
• Enhanced safety and protects the environment
• Easy, user friendly operation

SVC 50-2"

Male hose coupling of steel with Spannloc clamps

DDC-M 50-2" SS

MannTek Dry Disconnect Coupling, DN 50, stainless steel

LNG Refuelling

LNG truck refuelling with 'N-LNG' Nozzle coupled to fuel, LNG 25 fill hose assembly with cover, bonding cable

Refuelling with ZVA Slimline 2 nozzle

Scuffguard, Product Sleeve and Colour Sleeve in grey special colour

Loading Brine (salt solutíon for winter service): CHS hose asssembly, DDC Dry Disconnect Coupling

Double Closing Safety Swivel Break

SSB 25 DC

GasGuard LPG / Autogas refuelling equipment

Nozzles, nozzle boot for dispenser installation, LPG 16 hose assemblies, Safety Break ARK 19

DDC Dry Disconnect Couplings for chemicals

Rail tanker loading/unloading

EA 075, EA 318, EA 375

Swivel

ZVA Slimline 2 with Splashguard, Slimline hose assembly blue

Malaysia

TW 100, DDC-M 100, airport depot

Dry Disconnect Coupling for Loading/Unloading

SFX 50.16

hose flange; hose tail and swiveling flange of steel, Spannfix clams

Elaflex Hamburg

Slimline quality dispensing hose for the forecourt

SX 50 SS

Spannfix clamp DN 50 of stainless steel

CBC-PERC 100

Cryogenic Breakaway Coupling "PERC" for LNG after pneumatic separation

MK 80-2" AG

TW female coupler, brass, with reduced male thread (special type)

ROTEX 80.16

Rubber Expansion Joint suitable for permanent use with hot heating water, cooling water and hot air. Approved according to DIN up to 100° C by 10 bar and up to 110° C by 6 bar. Temperature range (depending on medium) - 40° C up to + 130° C, temporarily up to + 150° C. Electrically dissipative

Multi Product Dispenser with ZVA Slimline 2 nozzles, SSB 16 Safety Breaks with BS 16 Break Sleeves

Type PCS 38 (Polypal Clean DN 38 mm)

Road tanker with open hose reel, HD hose assembly, ZV 500 nozzle

Hose with SC 50 SS Spannloc stainless steel clamps - corrosion protection against road salt

Alternative fuels: DME Dimethyl Ester

DGC Dry Gas Coupling, EFL 16 Fluorline hose assembly

MKC 75 SS

TW female one-part coupler, stainless steel

FHD 50 special type HIFR

(helicopter in flight refuelling)

ERV-R 50.16 ZS 2

Red Band Rubber Expansion Joint with "ZS" limiter (tie rods with outer limitation in rubber bushings)

BD 63 Hose Beads

to EI 1522 standard - notably improve handling as they reduce friction against the tarmac. They additionally protect against hose abrasion. 'BD' Hose Beads are highly break resistant, contain no bolts or nuts, can be easily assembled or disassembled and are suitable for reeling.

Fuel Grade Identification to EN 16942 for ZVA Nozzles

Type EK FGI