Media Library / Images

VX 75-3" Ms

Male hose coupling 3" BSP of brass with Spannfix clamp

"Yellow Band" Rubber Expansion Joints, aircraft dispenser

ERV-G 200, ERV-G 150

GasGuard LPG nozzle GG30: optional Magnet in the guard

For contactless activation of dispensers with reed switch technology

Rubber Expansion Joint ERV-GR 80.16

GREEN BAND expansion joints for chemicals, acids, alkalis and aggressive chemical waste water. For oil-contaminated compressed air up to + 90° C. Temperature range (depending on medium) - 20° C up to + 100° C, temporarily up to + 110° C. Electrically non-conductive.

HD-C LT, Low Temperature

Antarctica: Low Temperature aircraft refuelling hoses in action; fuel transfer from drums via mobile pump

CHD 32

Lilac Band chemical hose without helix, DN 32

Hose Connection with TW coupling, TSG 3" Sight Glass

MK 80-32° coupling with bent lever. For any application it should be checked that the lever can be arrested as shown even if there is tight space. Elaflex offers bent levers for all MK couplers.

Ferrule threaded hose coupling M 19-1" cr

for petrol station dispensing hoses

BD 63, Hose Beads at airport depot

ARK 19 Safety Break including BS 19 Break Sleeve

Safety Break (Hose Break) for installation to LPG Autogas dispensers. Reassembly on site without tools

Oasis BV706 ball valves with Code 62 flange and SAE connection, for CNG

Oasis SV104 Sandwich Valve with Air Torque Actuator, for CNG

Elapharm EPH-OHM with welding end

Rubber Expansion Joint ERV-R 80.16

RED BAND expansion joints for water, drinking water (approvalDVGW W 270 as well as ACS, conform to FDA), cold and warm waste water, seawater, cooling water, also with chemical additives for water treatment, low concentrated acids and alkalis, salt solutions, technical alcohols, esters and ketones. Can be used in oily athmospheric environments, e.g. engine rooms. Temperature (depending on medium) - 40° C up to + 100° C, temporarily up to + 120° C. Electrically dissipative.

HD-C, ZVF 50, Refueller

Aircraft refueller, overwing refuelling JET

Elaflex hose assemblies, nozzles and Rubber Expansion Joints for the chemical industry

ERV-BR 100.16

BR Rubber Expansion Joint, special type for abrasive media such as sludges, slurries, solid / liquid mixtures and emulsions, dustlike or powdery products. Also suitable for all kinds of water (non oil containing) as well as various chemicals. Not suitable for petroleum based products. For extreme strain (e. g. sharp and rough-edged matter) we suggest the use of ERV with inner protection sleeve type SR.

GasGuard LPG nozzle GG30

LPGas nozzle with Bayonet connection according to EN 12806 - 2003 for the filling of commercial and passenger Autogas vehicles as well as mobile and small stationary storage tanks with propane and butane. New : 4-slot design to facilitate connection of the nozzle to the vehicle fill point. New nose piece design to reduce the released gas upon valve closure, incorporating improved gas release method to minimise the risk of splash back.

DAC, Airport Depot

Dry Aircraft Coupling ISO 45 with HD-C hoses for bottom loading of aircraft refuellers at airport depot